Embedded Wall 7" Automation Terminal Touch Screen With Android OS

This model Q896 android tablet support three different wall mounting ways: inwall flush mount, onwall surface mount and glass wall mount.

With RJ45 ethernet port, USB port, HDMI port, CVBS IN and customized RS232/RS485 etc optional configurations for your specific demand.

The 7" industrial control tablet can be suitable to home automation, office room scheduling, and other control terminal applications.

Advantage:

• Android OS rooted
• Inwall flush/onwall surface/glass wall/desktop four different mounting methods
• CBVS , HDMI, USB 2.0(USB host by default),GPIO/RS232/RS485
• No physical buttons design & No battery design
• Auto boot up when power supplies
• DC IN 9-36V
• POE (IEEE 802.3 af 48V)
• Can remove Android navigation bar support full screen application in a kiosk mode
• Optional to provide USB jumper to connnect PC for debugging

1.HDMI OUT

2.CVBS IN

3.DC IN (9-36V)

4.RJ45

5.USB 2.0 (USB host mode by default)

6.RS232/RS485/GPIO

7.SLOTS FOR MOUNTING

8.SCREWS FOR MOUNTING

Specification:

Model Number		Q896
Hardware Specification	Solution	Allwinner’s A20 processor, a Dual-Core Cortex™-A7 CPU
	CPU	ARM Cortex A7 Dual-Core, 1.2Ghz
	Display	7 Inch IPS Display, Resolution:1024 x 600, Brightness: 350 cd/m2
	RAM	1GB
	Nand Flash	8GB
Software Feature	System	Google Android 4.2.2
	Video	H.264 2160p video decoding, Multi-format FHD video decoding, including Mpeg1/2, Mpeg4 SP/ASP GMC, H.263, H.264, VP6/8, AVS jizun, Jpeg/Mjpeg,etc. H.264 High Profile 1080p@30fps or 720@60fps encoding 3840 x 1080@30fps 3D decoding, BD/SBS/TAB/FP supported Complies with RTSP, HTTP, HLS, RTMP, MMS streaming media protocols
	Audio	One Speaker 1 X 1 Watt (Integrated 3W Amplifier)
	Language	Support multi-languages
Interfaces	Back	Ethernet Interface(RJ45)
		HDMI Out
		USB Socket
		CVBS IN
		DC IN Power Terminal (9V-36V)
		Optional:RS232,RS485,1xGPIO IN, 1xGPIO OUT
Network	WIFI+BLUETOOTH	WIFI (802.11b/g/n), Bluetooth 4.0 support BLE
	LAN Port	Ethernet RJ45
Power Supply	DC IN	DC 9V - 36V
Boot Up	Auto Boot	Auto Boot Up When Power Supplies

Power over Ethernet or PoE technology describes a system to safely transfer electrical power, along with data, to remote devices over standard category 5 cable in an Ethernet network. It does not require modification of existing Ethernet cabling infrastructure. The IEEE 802.3af PoE standard provides up to 15.4 W of DC power (minimum 44 VDC and 350 mA) to each device. Only 12.95 W is assured to be available at the powered device as some power is dissipated in the cable. Long distance transmission is available for our max power need about 7w, safe and easy to be used with other POE switch or POE injector ( IEEE 802.3af PoE standard)
What is PD and PSE?
Power Over Ethernet, IEEE802.3af, is constructed by Power Sourcing Equipment (PSE) and Power Device (PD). Our Android Tablet works as a PD and which could powered by some PSE (POE injetor / POE switch)
In/Out protocol Application PD Power Device Power Input from Ethernet(RJ45) Input POE 802.3 AF(15.4W) Home automation / Safety & protection POE 802.3 AT(30W)
Benefits:
	Cost Saving PoE significantly reduces the need for electricians to install conduit, electrical wiring, and outlets throughout the enterprise. With PoE only one cable – a simple CAT-5 Ethernet – is required. Estimates of cost savings using PoE range from $500 to $1,000 per port. In larger settings, this represents a major cost reduction. Flexibility A PoE appliance or device can be located anywhere without the need for AC outlets. For example, wireless LAN access points can be located – and relocated – on or near ceilings, to fine tune optimum RF reception. For example, customers often find that access points are more effective on the ceiling, out of reach from an AC outlet. Reliability Because PoE networks have fewer wires, there is less likelihood of an inadvertent power disruption (accidental shut off, etc). With an Uninterrupted Power Supply (UPS) power to the devices is assured during a power failure. Network Control Using SNMP, network administrators can monitor and control powered devices, including resetting or shut-off. This allows increased security, as devices can be powered down when not in use, or if there is unauthorized access. Safety Power mains are eliminated. Since only 48v DC is used, PoE conforms to Underwriter's Laboratories (UL) Safety Extra Low Volt

SIBO Q896 Android Tablet PC RJ45 POE

Tablet with customized RS232 POE RJ45 GPIO CVBS RS485 :

In wall flush mounting: (with metal enclosure)

On wall mounting:

Desktop mounting

Glass mount:

 Shenzhen Sibo Industrial & Development Co. Ltd, which is a high technology enterprise, specialized in R&D, manufacture, marketing and technological services ,with complex management ability and international competing ability. 

We are specialized in producing automation control appliances. Our company was set up in 2001 in Shenzhen City.

Our main products are 7 inch , 9inch and 10.1inch android tablet pc with multifunction and other electronic products for home automation, industrial control, Car advertising player, Bus VOD System, and so on.